Why does my arc receiver not work on my TV?

Here’s the details: TV speakers automatically turn off (if receiver is turned on). TV remote will then control volume on receiver. But still no sound. Here are the things I’ve tried in order to fix it: Tried 3 different HDMI cables (all rated for ARC).

Is there a problem with my Yamaha receiver?

ARC Problem with Yamaha Receiver. ARC is not a source, but smply the means by which audio is conveyed back to the receiver from the TV via HDMI. If configured correctly then AV4 TV input will be the default source you use in conjunction with ARC sourced audio. Read the manual.

Why does my Yamaha rx-v573 receiver have no display?

However, the pins for the cables that bring power to the LCD board from PCB2 have no current. Also, a small IC near those pins/cables has no current, whereas several similar ICs on PCB2 have 5V. There are also a couple ribbon cables that connect PCB2 to the LCD board and another board that are registering 3V properly.

How to troubleshoot an RC transmitter and receiver?

1 Check Your Frequency. A few examples of toy-grade RC frequencies. Make sure you have the right transmitter at the right frequency for the vehicle. 2 Check Your Batteries. An RC battery pack. Put good, fresh batteries in the RC and in the transmitter. 3 Return Your RC. Put it back in the box. 4 Repair Your RC. Take it apart and fix it. …

What makes a Yamaha rx-a3010 AV receiver different?

The speaker angle measurement is what separates the RX-A3010 from less expensive models including the Yamaha RX-A2010. Speaker angle measurements are taken into the equation because analyzing the room acoustics.

What to do if your Yamaha rx-a1040 protection circuitry activated?

When the unit is in this condition, the standby indicator on the unit blinks if you try to turn on the power….REMEDY: As a safety precaution, capability to turn on the power is disabled. Contact your nearest Yamaha dealer or service center to request repair.” Has anyone experienced this before?

How does an AV receiver work on a Yamaha TV?

The AV receiver plugs in to HDMI 4 on the one connect box with all sources plugging into the Yamaha and that doing all the switching of the picture and sound. The receiver is set to pass through and the HDMI handshakes with the TV and plays the video.

Can a Yamaha rx-v483 receiver be turned off?

Assuming the reason for the protection has passed or been fixed, the unit can now be turned off and then back on with the “main zone” power button to restore normal operation mode. If the protector activates again, the fault is still present and the unit needs to be repaired, ideally by a Yamaha authorised repairer.