What is protector push power?

The PROTECT and PUSH POWER messages will flash alternately when the protective device of the amplifier has been activated because a strong signal was input, or if there is a short-circuit detected. To resolve the issue, turn the amplifier off and leave it off for at least 30 minutes.

Why does my TV not show the Home Menu?

The home menu does not appear on the TV screen. The home menu can only be used when you connect the TV to an HDMI OUTjack. When you want to display the menu on the TV screen connected to the HDMI OUT B/HDMI ZONEjack, set [HDMI Out B Mode] to [Main]. Press HOMEto display the home menu. Check that the TV is connected correctly.

How do I display the menu on my TV?

When you want to display the menu on the TV screen connected to the HDMI OUT B/HDMI ZONEjack, set [HDMI Out B Mode] to [Main]. Press HOMEto display the home menu. Check that the TV is connected correctly.

What are the pins on a Sony DVD player?

Sony HDX466 DVD player. I removed all cables to the dvd, There is a 6 pin connector that provides power to the sled and the spindle, and 2 pins in the center marked LIMITER and GROUND. Jumper these 2 pins and you will have sound from the other sources.

What kind of speakers do I need for my Sony TV?

Connecting speakers Connecting 5.1-channel speaker system Connecting 7.1-channel speaker system using surround back speakers Connecting 7.1-channel speaker system using front high speakers Connecting 5.1-channel speaker system with Zone 2 connection Connecting 3.1-channel speaker system with Zone 2 and Zone 3 connections

Why is my Sony home audio protector flashing?

Sony Home Audio Protect Flashing 1 If there has been an electrical surge or power outage, then the internal surge protection inside the home audio device… 2 Ensure the top of the home audio device has proper ventilation to keep it from overheating. Running the home audio… 3 Reduce the volume level. If the impedance of any of the… See More….

The home menu does not appear on the TV screen. The home menu can only be used when you connect the TV to an HDMI OUTjack. When you want to display the menu on the TV screen connected to the HDMI OUT B/HDMI ZONEjack, set [HDMI Out B Mode] to [Main]. Press HOMEto display the home menu. Check that the TV is connected correctly.

When you want to display the menu on the TV screen connected to the HDMI OUT B/HDMI ZONEjack, set [HDMI Out B Mode] to [Main]. Press HOMEto display the home menu. Check that the TV is connected correctly.

Connecting speakers Connecting 5.1-channel speaker system Connecting 7.1-channel speaker system using surround back speakers Connecting 7.1-channel speaker system using front high speakers Connecting 5.1-channel speaker system with Zone 2 connection Connecting 3.1-channel speaker system with Zone 2 and Zone 3 connections