How to identify a system remote control sr-250?
Rachel Hernandez How to identify a system remote control sr-250?
• Select the System Remote Control SR-250 in the center pane. • Click Identify (or right-click and choose Identify). • When prompted to do so, press the red 4 button four (4) times to identify the device to the Control4 system (Figure 2).
How to install AA batteries in an sr-250?
Install the four (4) AA batteries (included) into the System Remote Control SR-250 User Guide IInstall and Maintain Batteries Install the Batteries Install the four (4) AA batteries (included) into the back of the SR-250. Insert them according to the diagram provided in the battery compartment (with the + and – terminals aligned correctly).
Why does my SR 250 say ” offline “?
They gave me their old sr-250 to recycle. I thought about adding it to my system as a spare. ive factory reset it, but it will not identify into my mesh. when i go to associate, it briefly flashes “searching,” but ultimately just says “offline.”
How to program paging on a remote control?
To program the paging feature for the remote: 1 Start Composer Pro and connect to a Director. 2 Select the Programming view. 3 Select the Event that you want to use to start the page. For example, to select a keypad button press]
• Select the System Remote Control SR-250 in the center pane. • Click Identify (or right-click and choose Identify). • When prompted to do so, press the red 4 button four (4) times to identify the device to the Control4 system (Figure 2).
They gave me their old sr-250 to recycle. I thought about adding it to my system as a spare. ive factory reset it, but it will not identify into my mesh. when i go to associate, it briefly flashes “searching,” but ultimately just says “offline.”
What kind of remote control do I need for Control4?
Control4 System Remote Control SR-250 (Model C4-SR250B-Z-B) is intended for use in a Control4® system with OS 2.0 and later. It is included with the purchase of select Control4 Controllers, but may also be purchased separately.
To program the paging feature for the remote: 1 Start Composer Pro and connect to a Director. 2 Select the Programming view. 3 Select the Event that you want to use to start the page. For example, to select a keypad button press]
