How do I reset my Yamaha RX v385?

Note: This procedure will be done on the front panel.

1. Set the unit to Standby Mode using the Power button.
2. While holding down Straight button, hit the Power button.
3. Use the Program Selector buttons to navigate to INIT CANCEL.
4. When the proper selection is made, turn off the unit using the Power button.

Why is my Yamaha rx-v685 HDMI output not working?

It appears my output problem started when I accidentally pressed the HDMI Out button when trying to power off the unit without knowing it. The HDMI Out button is dangerously close to the power button and easy to hit accidentally.

How to play net radio on Yamaha rx-v775?

For the RX-V775 you cannot safe a net radio station to a preset by pressing the memory button on the receiver. you have to select the net radio input and the push the OK/Select Button on your remote to play the first radio station. thats very ugly but – in my opinion – the only way to automate this.

How to troubleshoot an arc Yamaha AV receiver?

ARC Setup / Troubleshooting for AV receivers. Verify Input Selection and volume: Receiver would be set to AUDIO 1 Input (initial setting). *The initial setting may differ depending on the product. For details, refer to the Owner’s manual.

Can a Samsung TV be connected to a Yamaha receiver?

That’s fine as long as you are awared, when selecting PC, (1)Switch TV HDMI to appropriate port, (2)Tell Receiver to get its audio from the ARC. However, we did do some barebones when testing, unplugging all other devices from both the TV and the Receiver, so that they were only connected to each other without other devices interfering.

Why is my Yamaha rx-v2067 Net Radio not connecting?

Yamaha RX-V2067 Net-radio will not connect Thread starterRace Start dateJan 4, 2013 Tags yamaha R Race Standard Member Jan 4, 2013 #1 I normal use the Net-radio function everyday. But it stop working without any reason. The receiver are writing “Not connected” in the display.

Is the Yamaha RX V471 receiver still working?

I have a Yamaha RX V471 receiver only connected to some polk speakers and ipod and we had a power blackout recently, previously it had been working perfectly. Whilst there was no power (still plugged in), I tried switching it on (with the remote) and it ‘weakly’ came on with the usual click which was weird, but it ‘died’ after that.

Why does my Yamaha Net Radio stop working?

I normal use the Net-radio function everyday. But it stop working without any reason. The receiver are writing “Not connected” in the display. I can access the receiver via the web interface and the receiver can connect to my computer, and play music from it. Have tried to use DHCP, Manuel IP with different DNS servers in the network setup.

ARC Setup / Troubleshooting for AV receivers. Verify Input Selection and volume: Receiver would be set to AUDIO 1 Input (initial setting). *The initial setting may differ depending on the product. For details, refer to the Owner’s manual.